+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

The 2900L

Universal Device Programmer with Precision Socket Actuator Lever

Precision High Volume Production Manual Programmer– the 2900L is a multi-socket manual production programmer ideal for volumes from 1K to 500K+ per year. BPM’s 2900L is excellent for smaller jobs with long programming times

Extendable

Increase utilization & lower overall costs

Ergonomic Design

Reduce operator fatigue & increase yield

9th Gen Site Technology

Future-proof investment with universal site technology

Lowest Programming Cost

Higher throughput at lower cost per device

Improved Production Throughput

Operators can consistently actuate sockets while placing and removing devices, minimizing fatigue from opening standard and high-tension sockets by hand. Precision socket actuation increases socket longevity. Opening the socket fully and evenly every time minimizes the potential for bent pins on programmable devices. The Universal Pressure Plate supports virtually all available production sockets and allows for quick package changes and adjustments.

Performance

For ultimate performance, we combined our powerful Vector Engine Co-Processor®, capable of achieving a peak operating rate of 12.8 Gb per second, with true universal device support for MCUs, managed NAND, flash memory and more.

What’s Inside

Our Vector Engine Co-Processor accelerates flash memory waveforms during the programming cycle. Faster speeds are achieved through synchronous operations that eliminate the dead times when the DUT waits on the programmer. The result is programming near the theoretical limits of the silicon design– the faster the device, the faster the device is programmed.


Improved Production Throughput

Operators can consistently actuate sockets while placing and removing devices, minimizing fatigue from opening standard and high-tension sockets by hand. Precision socket actuation increases socket longevity. Opening the socket fully and evenly every time minimizes the potential for bent pins on programmable devices. The Universal Pressure Plate supports virtually all available production sockets and allows for quick package changes and adjustments.

Performance

For ultimate performance, we combined our powerful Vector Engine Co-Processor®, capable of achieving a peak operating rate of 12.8 Gb per second, with true universal device support for MCUs, managed NAND, flash memory and more.

What’s Inside

Our Vector Engine Co-Processor accelerates flash memory waveforms during the programming cycle. Faster speeds are achieved through synchronous operations that eliminate the dead times when the DUT waits on the programmer. The result is programming near the theoretical limits of the silicon design– the faster the device, the faster the device is programmed.

Versatility & Capacity

OneNAND, eMMC, iNAND, MLC, SLC, MCU, PLD―whatever your device type, the 2900L supports it. Plus, you can connect up to eleven programmers to one PC for concurrent programming of up to 44 devices!

High-Quality Socket Cards

FVE4ASML49BGK Socket

Socket cards provide the electro-mechanical interface between your device and the programmer. They’re precisely designed to deliver high-fidelity waveforms to the programmable device, ensuring very high first-pass yield. Each individual socket card can be fully utilized and easily replaced to maintain full programming capacity. Our socket card design, with a receptacle socket option, ultimately increases your manufacturing uptime, produces higher first-pass yield, and saves replacement costs by as much as 75 percent.

Complete Ecosystem

BPM Microsystems has ownership of all designs, manufacturing, and support for all programming sites, robotics, vision systems, and software, so we can provide unmatched support and responsiveness

  • Reduce your time to market by doing New Product Introduction/First Article through Automated Production with the same hardware, algorithms, and software
  • 2900 and 2900L for 9th Gen Manual Production and Fast First Articles, plus the 1710 7th Gen Manual Programmer; the  3901, 28-socket 3928, and the 48-socket UFS BPM310 for Automated Programming System Productiononly BPM can deliver

Why use the 2900L?

Extendable

Connect multiple 2900s to one computer to program up to 44 devices simultaneously!

Highest Quality

Mission-critical quality standards

Future- Proof

Years of rock-solid performance

Faster & Easier

BPWin and JobMaster™ delivers quick set-up and fast production
Programming Hardware

Operating Voltage: 100-240 VAC, 50-60Hz
Architecture: 7TH Generation Concurrent Programming System
Sites: 1 per chassis, 1 to 4 sockets per site
Calibration: Annual
Site Diagnostics: Pin continuity test, ROM, CPU, pin drivers, power supply, communications, cables, calibration, timing, ADC, DAC, interconnects
Daughter Card Diagnostics: Ground Transistors, digital driver path to programmer, dcard LEDs, customizable diagnostics per dcard.
Continuity Test: Each pin, including Vcc, ground, and signal pins, may be tested before every programming operation
Memory: 512MB per site
Communications: USB 2.0
Firmware ROM: Software automatically performs firmware download
Programming Yield: Assured by 240 independent  pin drivers on each socket, short distance from pin drivers to device, and active circuits to generate the cleanest waveforms

Software

Required: BPWin
File Type: Binary, Intel, JDEC, Motorola, POF, RAM, straight hex, hex-space, Tekhex, Extended Tekhex, ASCII hex, Formatted Binary, AFM, OMF, LOF, STAPL, and others
Device Processes: ID check, blank check, continuity, checksum, compare, program, test, verify, erase, secure, options
Devices Supported: Memory, FPGA, Antifuse, CPLD, PLD, Microcontroller, Flash, NOR, Serial Flash.,EPROM, EEPROM, Managed NAND, MCU
Protection: Overcurrent shutdown, power failure shutdown, ESD protection, reverse insertion, banana jack for ESD wrist strap
User Interface: Pass, Fail, Active, Start Switch; PC shows systems status at a glance
Operating Systems: Windows 10, Windows 7
Algorithms: Large library of existing algorithms. All algorithms are produced using manufacturer specifications. BPM Microsystems has an excellent record of being first to provide certified algorithms for new devices.

Mechanical Specifications

Operational Temperature: 55° to 90° F (13° to 32° C)
Relative Humidity: 30-80%
Dimensions: Length 298mm x width 220mm; working height (excluding sockets) 119mm
Weight: 3.28kg
Power: Connect 1710 to computer + power and switch power on button

Pin Drivers

Quantity: 240-pins drivers standard. Pin drivers and waveform generators are fully independent and concurrent
Analog Slew Rate: 0.3 to 25V/us
Vpp Range: 0V to 25V
Ipp Range: 0-70mA continuous, 250mA peak
Vcc Range: 0V to 12V
Icc Range: 0-1A
VLV Range: To 1.5V (Vdd)
Rise Time: 4ns
Protection: Overcurrent shutdown, power failure shutdown.
Clocks: Continuously variable 1MHz to 30 MHz

Warranty

Hardware: One Year Warranty Subscription
Software: Lifetime Software Update Subscription

Intrigued?

Learn How BPM Microsystem's Semi-Automatic Programmers Deliver ROI