Xilinx XC7Z100-FFG1156 BGA(1156) Device
Adapters for Automated Programmers
| 8th Gen |
| FVEASML1156BGA (obs.), FVEASML1156BGA (obs.) |
Adapters for Manual Programmers
| 8th Gen |
| FVESML1156BGA, FVEASML1156BGA (obs.), FVEASML1156BGA (obs.), FVESML1156BGA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This device selection is custom. Please contact Tech Support before using this device selection. This algorithm uses 2 QSPI flash memories (QSPI_0 and QSPI_1) to program and verify the ZYNQ device. Before program the ZYNQ device will boot using the image loaded to QSPI_0 (mapped to buffer address 00000h-3FFFFh). To verify that the ZYNQ device is programmed correctly it needs to boot from the validation image which need to be loaded to QSPI_1 (mapped to buffer address 40000h-7FFFFh). The programming file which contains the values of the PS efuses and PL efuses is mapped to buffer address 80000h-827FFh. This device requires the use of BP-2800 Enhanced FX800-SITE-C01. Due to the special circuitry on the socket module several self-test features are disabled. Please test programmer functionality with an alternate socket module.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 534528 |
|---|---|
| Manufacturer | Xilinx |
| Packages | BGA(1156) |
| Part Number | XC7Z100-FFG1156 |
| Set programming | Yes |
| Vcc(program) | 1.9 |
| Package |