Xilinx XC7Z010-CLG400 BGA(400) Device
Adapters for Automated Programmers
| 8th Gen |
| FVEASM400BGC, FVEASM400BGC |
Adapters for Manual Programmers
| 8th Gen |
| FVEASM400BGC, FVEASM400BGC |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This device selection is custom. Please contact Tech Support before using this device selection. This algorithm uses 2 QSPI flash memories (QSPI_0 and QSPI_1) to program and verify the ZYNQ device. Before program the ZYNQ device will boot using the image loaded to QSPI_0 (mapped to buffer address 00000h-3FFFFh). To verify that the ZYNQ device is programmed correctly it needs to boot from the validation image which need to be loaded to QSPI_1 (mapped to buffer address 40000h-7FFFFh). The programming file which contains the values of the PS efuses and PL efuses is mapped to buffer address 80000h-827FFh. This device requires the use of BP-2800 Enhanced FX800-SITE-C01.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 534528 |
|---|---|
| Manufacturer | Xilinx |
| Packages | BGA(400) |
| Part Number | XC7Z010-CLG400 |
| Set programming | Yes |
| Vcc(program) | 1.9 |
| Package |