Xilinx XC7K325T-2FF676 BGA(626) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This device selection is custom. Please contact Tech Support before using this device selection. Each bit in this device is One-Time Programmable (OTP). If a given eFUSE row has already been programmed it will not be able to be programmed correctly again. It is recommended to keep Blank Check enabled during Program. The FUSE_KEY bits map to [0000000h-000001Fh] in the Data Pattern (LSB-to-MSB). FUSE_KEY bits [0:7] map to Data Pattern [0000000h] bits [7:0]. FUSE_KEY bits [248:255] map to Data Pattern [000001Fh] bits [7:0]. The FUSE_USER bits map to [0000020h-0000023h] in the Data Pattern (MSB-to-LSB). The FUSE_CNTL bits map to bits [5:0] of Data Pattern address [0000027h]. The redundancy bits are programmed with the respective FUSE_CNTL bits. These bits map to the Device Config Settings. The bitstream length maps to [0000028h-000002Bh] in the Data Pattern (MSB-to-LSB). This can optionally be set to the length of just the bitstream. This can speed up verifying the bitstream if it is shorter than the maximum length. Setting the length shorter than the actual length will cause false verify failures. Setting the length longer than the actual length will not cause false verify failures but will take more time. Setting to 0 or greater than the maximum length (AE9D9Ch) will be ignored and the maximum length will be used. The bitstream maps to [000030h-AE9DCBh] in the Data Pattern. This device requires the use of BP-2800 Enhanced FX800-SITE-C01.