+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Winbond W25Q64FVBYIG BGA(16) Device

Adapters for Automated Programmers

8th Gen 9th Gen Flashstream
FVE4ASML16CSPB, FVE4ASML16CSPB FVE4ASML16CSPB FVE4ASML16CSPB, FVE4ASML16CSPB

Adapters for Manual Programmers

8th Gen 9th Gen Flashstream
FVE4ASML16CSPB, FVE4ASML16CSPB FVE4ASML16CSPB FVE4ASML16CSPB, FVE4ASML16CSPB

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Flash Memory
Device Size: 64 Mbit
Algorithm Programming method: Standard SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 000000h-7FFFFFh 000000h-7FFFFFh
SecSi sector R/W N0 800000 – 8030FF 800000 – 8030FF
Default Algorithm Range 000000h-7FFFFFh 000000h-7FFFFFh

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

Erase must be selected if device to be programmed already has QE bit enabled. There are four 256-Byte Security Registers with OTP locks independent from main memory mapped to [800000-8000FF][801000-8010FF][802000-8020FF][803000-8030FF] in the Data Pattern respectively.
Please note that Security Register 0 (mapped to [800000-8000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using register0.
The configuration option for the factory lock is used to indicate the status of the chip.
Please modify the range under Device > Range if any of the Security Registers needs to be included.
Bit 1 in Status Register 2 (QE Bit) is preprogrammed to ‘1’ at the factory. This bit cannot be changed back to ‘0’.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

8401152

Manufacturer

Winbond

Packages

BGA(16)

Part Number

W25Q64FVBYIG

Set programming

Yes

Vcc(program)

3.6

Package