+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page
Winbond W25Q16JVSNIM SOIC(8) Device

Winbond W25Q16JVSNIM SOIC(8) Device

Adapters for Automated Programmers

6th Gen 7th Gen 8th Gen 9th Gen Flashstream
FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) FVE4ASMR08SJCA, FVE4ASMR08SJAB, FVE4ASMR08SJCA, FVE4ASMR08SJAB FVE4ASMR08SJCA, FVE4ASMR08SJAB FVE4ASMR08SJCA, FVE4ASMR08SJAB, FVE4ASMR08SJCA, FVE4ASMR08SJAB

Adapters for Manual Programmers

6th Gen 7th Gen 8th Gen 9th Gen Flashstream
FSMR08SJA, FSM08SJA, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.) FSMR08SJA, FSM08SJA, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.) FVE4ASMR08SJCA, FVE4ASMR08SJAB, FVE4ASMR08SJCA, FVE4ASMR08SJAB FVE4ASMR08SJCA, FVE4ASMR08SJAB FVE4ASMR08SJCA, FVE4ASMR08SJAB, FVE4ASMR08SJCA, FVE4ASMR08SJAB

Adapters for Engineering Programmers

6th Gen 7th Gen
FSMR08SJA, FSM08SJA, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.) FSMR08SJA, FSM08SJA, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FASMR08SJA, FASM08SJA, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASMR08SJA (repl.), WX4ASM08SJA (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type: 16M-bit Serial Flash
Device Size: 16 Mbit
Algorithm Programming method: Standard Single SPI


Memory Organization:

Memory Type

Attributes(*)

 Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 001F_FFFF 0000_0000 – 001F_FFFF
256-Byte Security Registers R/W/E No 0020_0000 – 0020_30FF 0020_0000 – 0020_30FF
Default Algorithm Range — — 0000_0000 – 001F_FFFF 0000_0000 – 001F_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The status register bits can be set under Device > Configure. Erase must be selected if device to be programmed already has QE bit enabled. There are four 256-Byte Security Registers with OTP locks independent from main memory mapped to [200000-2000FF][201000-2010FF][202000-2020FF][203000-2030FF] in the Data Pattern respectively. Please note that Security Register 0 (mapped to [200000-2000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using register0.

‘

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

2113536
Manufacturer

Winbond
Packages

SOIC(8)
Part Number

W25Q16JVSNIM
Set programming

Yes
Vcc(program)

3.3
Package