+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Winbond W25Q02NWTBIM (Custom A01) BGA(24) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: This device selection is only for A&J testing

Device Type: 2G-bit Serial Flash
Device Size: 2G-bit
Algorithm Programming method: Standard Single SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 0FFF_FFFF 0000_0000 – 0FFF_FFFF
Security Registers 1 R/W/E No 1000_1000 – 1000_10FF 1000_1000 – 1000_10FF
Security Registers 2 R/W/E No 1000_2000 – 1000_20FF 1000_2000 – 1000_20FF
Security Registers 3 R/W/E No 1000_3000 – 1000_30FF 1000_3000 – 1000_30FF
Default Algorithm Range 0000_0000 – 0FFF_FFFF 0000_0000 – 0FFF_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The Status Register bits can be set under Device > Configure. There are three 256-Byte Security Registers with OTP locks independent from main memory mapped to [10001000-100010FF] [10002000-100020FF] [10003000-100030FF] in the Data Pattern respectively.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

268448000

Manufacturer

Winbond

Packages

BGA(24)

Part Number

W25Q02NWTBIM

Set programming

Yes

Vcc(program)

1.9