Ubicom SX28AC/SS SOIC(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM28SS, FASM28SSA | FASM28SS, FASM28SSA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM28SS, FSM28SSA, FASM28SS, FASM28SSA | FSM28SS, FSM28SSA, FASM28SS, FASM28SSA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM28SS, FSM28SSA, FASM28SS, FASM28SSA | FSM28SS, FSM28SSA, FASM28SS, FASM28SSA |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Flash microcontroller. The Byte Order in the Device/Options menu must be set to MSB=1 LSB=0’otherwise the device will be misprogrammed and may be damaged.Program and Verify ranges will be set according to the ‘BP’ bits in the FUSEX word.User IDs will be programmed and verified at the end of these ranges. CP bit in the FUSE wordwill be ignored during program. Always set Bit3(CP) equal to 1 for FUSE word.To enable Code Protection select ‘Secure After Programming’from the Device/Options menu. FUSE and FUSEX are mapped to buffer addresses: 2020h and 2022h. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Ubicom |
|---|---|
| Packages | SOIC(28) |
| Part Number | SX28AC/SS |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |