Ubicom IP2022/PQ80 QFP(80) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Internet Processor with 64KByte Program Memory. *** WARNING: Flash corruption may occur during power down if Brownout reset is disabled. ***In the buffer program memory is located at [10000h-1FFFFh]. [20000h-2007Fh] is Configuration Block. All other locations are not usedand should be set to FFh. *** Programming bit 15 of FUSE1 (Device address 10001h; Buffer address 20002h) to ‘0’ will protect the device. ***Automatic lowest address to loads’ in Buffer Options must be disabled. ‘Default Buffer Value’ in Buffer Options must be set to FFh. ‘Byte Order’ must be set to ‘MSB=0 LSB=1′.’Check Electronic Identifiers’ must be set to ENABLE.Stand alone Read Compare Verify Sum operations must NOT be performed on a programmed deviceif the program code in the data file performs a self-programming on the device. ‘