Texas Instruments UCD9090A QFN(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FASMR48QFNV | FX4ASMR48QFNV, FASMR48QFNV, LX4ASMR48QFNV (repl.) | FVE4ASMR48QFNV, FVE4ASMR48QFNV | LX4ASMR48QFNV |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FSMR48QFNV, FASMR48QFNV | FX4SMR48QFNV, FSMR48QFNV, FX4ASMR48QFNV, FASMR48QFNV, LX4ASMR48QFNV (repl.) | FVE4ASMR48QFNV, FVE4ASMR48QFNV | LX4ASMR48QFNV |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR48QFNV, FASMR48QFNV | FX4SMR48QFNV, FSMR48QFNV, FX4ASMR48QFNV, FASMR48QFNV, LX4ASMR48QFNV (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Device Information:
| Device Type: | 16-Rail Power Supply Sequencer and Monitor |
| Device Size: | 2048 bytes Data Flash |
| Algorithm Programming Method: | I2C Protocol |
Memory Organization:
| Section |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address (hex)(if this area is selected/Activated) | BPWin Buffer Byte Address (hex) |
| Data Flash | R/W | Yes | 18800h-18FFFh | 18800h-18FFFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: Data Pattern must have same firmware version as device. Please set Data Pattern Device ID under Device > Configure. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 102400 |
|---|---|
| Manufacturer | Texas Instruments |
| Packages | QFN(48) |
| Part Number | UCD9090A |
| Vcc(program) | 3.3 |
| Package |