Texas Instruments TMS320F28375SPTPT LQFP(176) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE2ASMR176QFPY |
Adapters for Manual Programmers
| 9th Gen |
| FVE2ASMR176QFPY |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | TMS320F2837xS Delfino Microcontroller |
| Device Size: | 1KB DCSM OTP + 1MB (512KW) Flash |
| Algorithm Programming Method: | Parallel GPIO Boot + Custom Bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Word Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| User configurable DCSM OTP Bank 0 | R/W | No | 0007 8000h – 0007 83FFh | 000F 0000h – 000F 07FFh |
| Flash[Bank 0 and Bank 1] | R/W/E | Yes | 0008 0000h – 000F FFFFh | 0010 0000h – 001F FFFFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: 1) The OTP and Flash memory can be used independently of each other by selecting the appropriate sections under Device > Configure options and Device setting: range. 2) Device will be locked after programming the CSM passwords and linkpointer into the DCSM OTP section. 3) Erase command will erase the entire contents of flash bank 0 and bank 1. 4) When programming the OTP memory only programming the data without the ECC is supported. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Texas Instruments |
|---|---|
| Packages | LQFP(176) |
| Part Number | TMS320F28375SPTPT |
| Set programming | Yes |
| Vcc(program) | 1.2 |