Microchip Technology PIC32MX130F064BT-I/SS SSOP(28) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR28SSG |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR28SSG |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 32-Bit Microcontroller. |
| Device Size: | 32KB Program Flash Memory + Boot Flash Memory. |
| Algorithm Programming Method: | Algorithm uses JTAG 4-wire with PE mode. |
| Serialization Supported: | Yes |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Word Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Program Flash Memory | R/W/E | Yes | E80_0000h – E80_7FFFh | 1D00_0000h -1D00_FFFFh | Boot Flash Memory | R/W/E | Yes | FE0_0000h – FE0_05F7h | 1FC0_0000h -1FC0_0BEFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | The four configuration words (4×32-bit) are mapped in the Data Patern at [1FC02FF0h-1FC02FFFh]. | |
| 2. | Please set ‘Little Endian’ under Device->Byte Order. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SSOP(28) |
| Part Number | PIC32MX130F064BT-I/SS |
| Vcc(program) | 3.3 |