Microchip Technology PIC18F2525T-E/SO SOIC(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM28S, FASM28SB, FASM28SH, FASM28SE | FASM28S, FASM28SB, FASM28SH, FASM28SE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.), FSM28SE, FSM28SB, FSM28SH, FASM28S, FASM28SE, FASM28SB, FASM28SH, FSM30S (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The 48Kbytes of Code Memory(Flash area) are addressed from [0h-BFFFh].The ID locations(8 bytes) are addressed in the Buffer at [200000h-200007h].The Configuration bytes are located at Buffer addresses [300001h-30000Dh].The 1024 bytes of Data Memory(EEPROM area) are addressed from [F00000h-F003FFh].The Configuration word may be set from the CONFIGURE menu or from the abovementioned addresses in your data file. All reserved bit locationsmust be set to zeros. Please use help notes under Device Configure to viewmore information about bit identities and reserved bit locations or see Microchip specs.To program the options in the Device Configure you must select the appropriate optionsAND you must ENABLE Secure. Otherwise none of the options will be programmed.The Sum command generates the checksum calculation as specified by Microchip.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 15729664 |
|---|---|
| Manufacturer | Microchip Technology |
| Packages | SOIC(28) |
| Part Number | PIC18F2525T-E/SO |
| Vcc(program) | 5 |