Microchip Technology dsPIC30F4013-20E/ML QFN(44) Device

IMPORTANT: Microcontroller with User Flash Code Memory (16Kx24-bit) and Data EEPROM (512Bx16-bit).The Code Memory is a 24 bit memory addressed from [0h-FFFFh] in the Buffer.The Data EEPROM is a 16-bit memory addressed from [FFF800h-FFFFFFh] in the Buffer.The Data EEPROM is a 16-bit value on a 32-bit boundary. The Code Memory is a 24-bit valueon a 32-bit boundary. This algorithm assumes Little Endian format for programming data.Unused bits should be set to 0 for Compare to pass.The device contain 32 instructions of Unit ID.These are located at address [1000B80-1000BFF] in the buffer.The Unit ID area is a 24-bit value on a 32-bit boundary.The Configuration bytes are located at Buffer addresses [1F00000h-1F00019h].Configuration bytes are also a 16-bit value on a 32-bit boundary.The Configuration word may be set from Device Configure or from the abovementioned addresses in the Buffer. All unimplemented bit locationsmust be set to zeros. Please use help notes in the Device Configure to viewmore information about bit identities and reserved bit locations or see Microchip specifications.Please use the Secure command to program the security options to the device.The Sum’ command generates the checksum calculation as specified by Microchip. ‘