Atmel ATXMEGA64D3-AU(Custom02) TQFP(64) Device

IMPORTANT: In the Data Pattern [0000h-FFFFh] is mapped to Application FLASH Memory [10000h-10FFFh] is mapped to Boot Flash Memory and [11000h-117FFh] is mapped to EEPROM Data Memory. If the BOD level defined in the lower three bits of FUSEBYTE5 is 000b (3.0V) a brownout reset is sent by the device and PDI Mode cannot be entered. The Fusebytes and Lockbits Registers are set under Device > Configure and will be programmed into the device if Secure box is checked. The contents of Application FLASH Memory may cause stand-alone verify to fail. ‘

SKU: ATMEL_ATXMEGA64D3-AU(CUSTOM02) Category: Uncategorized