+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Analog Devices ADM1062ASU TQFP(48) Device

Socket Module/Programmer for Device- TQFP Socket Modules (Available for Purchase)

Automated Programmers

LX4ASMR48TQR for 9th Gen, 7th Gen Programmers (This is a replacement daughter card that requires a base socket module)

Manual Production Programmers

FX4SMR48TQR for 7th Gen Programmers
FX4ASMR48TQR for 7th Gen Programmers
LX4ASMR48TQR for 9th Gen, 7th Gen Programmers (This is a replacement daughter card that requires a base socket module)

Engineering Programmers

FX4SMR48TQR for 7th Gen Programmers
FX4ASMR48TQR for 7th Gen Programmers
LX4ASMR48TQR 7th Gen Programmers (This is a replacement daughter card that requires a base socket module)

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


See available socket(s) for this device below. Analog Devices ADM1062ASU TQFP(48) Device, programmable on 9th and 7th Gen BPM programmers

The picture is only an example of a TQFP Device |  Search for ADM1062ASU Device on Digi-Key

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Analog Devices

Package
Packages

TQFP(48)

8-bit Bytes

64512

Memory Regions

F800h-F89Fh; F900h-FBFFh

IMPORTANT: Super Sequencer with Margining Control containing Serial EEPROM. Bit 0 of location F893h must be 0. The EEPROM is mapped to Buffer locations F800h-F89Fh and F900h-FBFFh. An EEPROM location must be blank before it can be written to. If it contains data, it must first be erased. Program, Verify and Read operations display the ADI Checksum as calculated from the data file. There are two ADI checksums displayed for these operations. 1. The ADI Checksum (SW version 4.0.0 and older) matches the Master checksum generated by the ADI SW version 4.0.0 and older. 2. The ADI Checksum (SW version 4.0.1 and newer) matches the Master checksum generated by the ADI SW version 4.0.1 and newer. The software revision and checksum values are included in the hex file generated by ADI software. Please refer to the hex file to match the SW version and corresponding master checksum with the ADI checksum displayed by BPWin.

You may also like…