Adesto Technologies AT45DB161E-SHD-T(512 byte page) SOIC(8) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMR08SHLB, FVE4ASM08SHLB, FVE4ASM08SHC (obs.), FVE4ASM08SHLB, FVE4ASMR08SHLB, FVE4ASM08SHC (obs.) | FVE4ASM08SHLB, FVE4ASMR08SHLB, FVE4ASM08SHC (obs.) | FVE4ASMR08SHLB, FVE4ASM08SHLB, FVE4ASM08SHC (obs.), FVE4ASM08SHLB, FVE4ASMR08SHLB, FVE4ASM08SHC (obs.) |
Adapters for Manual Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMR08SHLB, FVE4ASM08SHLB, FVE4ASM08SHC (obs.), FVE4ASM08SHLB, FVE4ASMR08SHLB, FVE4ASM08SHC (obs.) | FVE4ASM08SHLB, FVE4ASMR08SHLB, FVE4ASM08SHC (obs.) | FVE4ASMR08SHLB, FVE4ASM08SHLB, FVE4ASM08SHC (obs.), FVE4ASM08SHLB, FVE4ASMR08SHLB, FVE4ASM08SHC (obs.) |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Flash Memory |
| Device Size: | 16 Mbit |
| Algorithm Programming Method: | Serial |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | No | 000000-20003F | 000000-20003F |
| Default Algorithm Range | R/W/E | Yes | 00000-1FFFFF | 00000-1FFFFF |
| OTP User Programmable Range | R/W | No | 200000-20003F | 200000-20003F |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Notes: This algorithm supports 512 bytes per Page. Please make sure the data file is in 512 bytes per Page format. This device is set to 528 bytes per Page by default at the factory. A separate 528 byte page device selection can be used for data files in 528 bytes per Page format. Erase before programming must be enabled if the state of the device is uncertain. The device has a 128-byte Security Register. The first 64 bytes are the one-time user programmable space and the remaining 64 bytes are factory programmed by Atmel and will contain a unique number for each device. The factory programmed data is fixed and cannot be changed. The User Programmable Space is located in Buffer addresses [200000h-20003Fh]. If the User Programmable Space is not blank Erase will fail on this area. Please select ‘Entire File’ under Device Range if the User Programmable Space needs to be included. Sector LockDown can be set in Device Configure. Once a sector is locked down Erase and Program will fail. The sector then cannot be unlocked. This algorithm will automatically configure the device to use the DataFlash page size. Page sizes are reversible and can be changed from 528 bytes to 512 bytes or from 512 bytes to 528 bytes. Page sizes can only be switched up to 10000 times. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Adesto Technologies |
|---|---|
| Packages | SOIC(8) |
| Part Number | AT45DB161E-SHD-T |
| Vcc(program) | 3.3 |
| Package | |
| 8-bit Bytes |