+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

4900 Product Specifications

PICK & PLACE SYSTEM
Handler Throughput: Up to 1,500DPH (with vision centering)
Component Handling Range:  CSP8 to 240-pin QFP
Laser Alignment:  Component range – 0204
Placement Accuracy:   ± 0.03mm
Placement Repeatability:
 ± 0.06mm
Placement Force:  60-600 grams positional control
Self-test: Power supplies, CPU, memory, X, Y, Z, theta motion systems, spindle run-out and height, vacuum system
POSITIONING SYSTEM

X-Y Drive System: High-performance stepper motor driven precision belt 
X-Y Encoder Type: 
Linear optical scale
Z-Theta Encoder Type: Optical Encoder
X-Y Axis Resolution: 
 0.005mm
X-Y Axis Maximum Velocity: 
76cm/second
Z Drive System: 
High-performance stepper motor driven lead screw
Placement Accuracy: 
 90μ@ 4 sigma, 67μ@ 3 sigma
Z-axis Resolution: 
 ± 0.025mm
Z-axis Repeatability: 
 ± 0.038mm
Theta Drive System: 
 Precision stepper motor-driven direct anti-backlash twin gear assembly
Theta Axis Resolution: 
 0.015°
Theta Axis Repeatability:
 +/- 0.2mm

DIMENSIONS
Machine Dimensions:  Length 106.6cm, width 160.2cm, height 106.2cm
Machine Net Weight:  405.91kg
Shipping Dimensions:   Length 122cm, width 122cm, height 175cm
SYSTEM REQUIREMENTS
Air Pressure: 80psi (5.56 bars) minimum
Air Flow: 
 2.0scfm (50.1L/min)
Operational Temperature: 
 55° to 90° F (13° to 32° C) 
Relative Humidity: 
30-80% 
Minimum Floor Space: 
Length 106.6cm x width 106.6cm
Input Line Voltage: 
 100-130/20A 240VAC (+/- 10%)
Input Line Frequency: 
 50/60 Hz
Power Consumption:
 1.5KVA
SOCKET OPTIONS
Socket Modules: Support for existing FX and FVE socket modules. Universal 1900/2900 socket cards with 144 universal pins. Available Socket Cards including, but not limited to, standard PLCC, CSP, BGA, μBGA, SOIC, QFN, MLF, LAP, QFP, TSOP, LCC, SDIP, SIMM
WARRANTY
Hardware:  One Year Warranty
Software:
 One Year Support
SOFTWARE

Required: BPWin 
File Type: 
Binary, Intel, Motorola, RAM, straight hex, hex-space, Tekhex, Extended Tekhex, ASCII, hex, OMF, LOF, MER, and others 
Device Processes: 
ID check, blank check, continuity, auto start, compare, read, erase, program, verify, multi-pass verify, test, checksum, secure, device configure, auto-range, options and more
Operating Systems: 
 Windows 10, Windows 7, 64-bit 
Network Interface: 
Gigabit Ethernet
Other Options: Advanced Feature Software, simple and complex serialization, CJob, Monitor and CJob Control (API), Receptacle Socket options

PROGRAMMING HARDWARE
Architecture: 9TH GEN Concurrent Programming System with Vector Engine Co-Processor 
Programming Sites: 
Up to 12 sites, 2 to 4 sockets per site
Calibration: 
 Not required for 9th Gen
Diagnostics: 
RAM, communications, calibration, timing, LEDs, fans, pinoe, power supplies, voltage/current/slew for vpp and vcc, high current vcc mode, digital pin drivers, and relays. Ground Transistors, digital driver path to programmer, dcard LEDs, customizable diagnostics per dcard
Memory: 
 256GB per site, upgradable to 512GB
Communications: 
 USB 2.0
Data Pattern Broadcast: 
 25MB/s
Firmware Updates:
 Software automatically performs firmware download
PIN DRIVERS
Quantity: 240-pins standard, per site
Vpp Range: 
 0V to 25V 
Ipp Range: 
Up to 1.2A total
Vcc Range: 
 0V to 13V
Icc Range: 
 0-2A
Rise Time: 
4ns
Protection: 
Overcurrent shutdown, power failure shutdown
Independence: 
Pin drivers and waveform generators are fully independent and concurrent on each site 
Digital Range: 
0-4.5V
Clocks:
 800kHz to 64MHz
PERIPHERAL OPTIONS
Peripherals: Fiber Laser Marker, 3D Inspection, X-Stream™ Tape Feeder, Tape Output, TS1500 Tray Stacker, Stationary Tray, Tube

Intrigued?

Learn How BPM Microsystem Delivers Maximum ROI