Adesto Technologies AT25SF161-SSHD-T(Custom A01) SOIC(8) Device

Adapters for Automated Programmers

9th Gen

WX4ASM08SJA, FVE4ASMR08SJAB, FVE4ASMR08SJCA, WX4ASMR08SJA

Adapters for Manual Programmers

9th Gen

WX4ASM08SJA, FVE4ASMR08SJAB, FVE4ASMR08SJCA, WX4ASMR08SJA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	Flash Memory
Device Size:	16 Mbit
Algorithm Programming method:	Standard SPI

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	000000h-01FFFFFh	000000h-01FFFFFh

Default Algorithm Range	R/W/E	Yes	000000h-01FFFFFh	000000h-01FFFFFh

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device > Configure. Erase must be selected if device to be programmed already has QE bit enabled. There are three 256-Byte Security Registers with OTP locks independent from main memory mapped to [0200000-02000FF] [0200100-02001FF] [0200200-02002FF] in the Data Pattern respectively.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Adesto Technologies
Packages	SOIC(8)
Part Number	AT25SF161-SSHD-T
Set programming	Yes
Vcc(program)	3.3
Package
8-bit Bytes