Xilinx XC17S50A-PD8 DIP(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Serial Configuration PROM.Xilinx recommends that the Default buffer value:’ in the Buffer/Optionsmenu be set to FFh (255) before loading your data file.MAKE SURE THE RESET POLARITY IS SET BEFORE PROGRAMMING THIS PART.RESET Polarity can be set in Device/ResetPol. The default setting is HIGHRESET Polarity can only be changed from HIGH to LOW but not vice versa. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 131072 |
|---|---|
| Manufacturer | Xilinx |
| Packages | DIP(8) |
| Part Number | XC17S50A-PD8 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |