Winbond W74M12JWSSIQ SOIC(8) Device

Adapters for Automated Programmers

8th Gen	Flashstream
FVE4ASML08SZA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA, FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASM08SHLA, FVE4ASML08SZA	FVE4ASML08SZA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA, FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASM08SHLA, FVE4ASML08SZA

Adapters for Manual Programmers

8th Gen	Flashstream
FVE4ASML08SZA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA, FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASM08SHLA, FVE4ASML08SZA	FVE4ASML08SZA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA, FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASM08SHLA, FVE4ASML08SZA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	128M-bit Serial Flash
Device Size:	128 Mbit
Algorithm Programming method:	Standard SPI

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_0000-00FF_FFFF	0000_0000-00FF_FFFF
256-Byte Security Registers	R/W/E	No	0100_0000 – 0100_30FF	0100_0000 – 0100_30FF

Default Algorithm Range	—	—	0000_0000 – 00FF_FFFF	0000_0000 – 00FF_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The status register bits can be set under Device > Configure.The status register bits can be set under Device > Configure .There are three 256-Byte Security Registers with OTP locks independent from main memorymapped to [1001000-10010FF][1002000-10020FF][1003000-10030FF] in the Data Pattern respectively. Please note that SFDP Register (mapped to [1000000-10000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using SFDP Register.The default Device Range is set to [000000h-FFFFFFh].Please modify the range under Device > Range if any of the Security Registers needs to be included.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	16793600
Manufacturer	Winbond
Packages	SOIC(8)
Part Number	W74M12JWSSIQ
Set programming	Yes
Vcc(program)	1.9
Package