+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Winbond W25Q64JVZESQ WSON(8) Device

Adapters for Automated Programmers

9th Gen
FVE4ASM08MLPA

Adapters for Manual Programmers

9th Gen
FVE4ASM08MLPA

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.

Device Type: 64M-bit Serial Flash
Device Size: 64 Mbit
Algorithm Programming method: Standard Single SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF
Security Registers 1 R/W/E No 0000_1000 – 0000_10FF 0080_1000 – 0080_10FF
Security Registers 2 R/W/E No 0000_2000 – 0000_20FF 0080_2000 – 0080_20FF
Security Registers 3 R/W/E No 0000_3000 – 0000_30FF 0080_3000 – 0080_30FF
Default Algorithm Range 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The Status Register bits can be set under Device > Configure. For this device the Factory Default setting is QE =1 There are three 256-Byte Security Registers with OTP locks independent from main memory mapped to [801000-8010FF][802000-8020FF][803000-8030FF] in the Data Pattern respectively.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

8401152

Manufacturer

Winbond

Packages

WSON(8)

Part Number

W25Q64JVZESQ

Set programming

Yes

Vcc(program)

3.6

Package