Winbond W25Q64JVSSIM (Single I/O) SOIC(8) Device

Adapters for Automated Programmers

6th Gen	7th Gen
FASMR08SHL, FASM08SHL, FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.)	FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4ASMR08SHA (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.)

Adapters for Manual Programmers

6th Gen	7th Gen
FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.)	FX4SMR08SHL, FX4SM08SHL, FSMR08SHL, FSM08SHL, FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4SMR08SHA (obs.), FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FX4ASMR08SHA (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WX4ASMR08SHA (obs.) (repl.), WASM08SHA (obs.) (repl.), LX4ASM08SHL (repl.)

Adapters for Engineering Programmers

6th Gen	7th Gen
FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.)	FX4SMR08SHL, FX4SM08SHL, FSMR08SHL, FSM08SHL, FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4SMR08SHA (obs.), FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SG (obs.), FX4ASMR08SHA (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SG (obs.), WX4ASMR08SHA (obs.) (repl.), WASM08SHA (obs.) (repl.), LX4ASM08SHL (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	64M-bit Serial Flash
Device Size:	64 Mbit
Algorithm Programming method:	Standard Single SPI

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_0000 – 007F_FFFF	0000_0000 – 007F_FFFF
256-Byte Security Registers	R/W/E	No	0080_0000 – 0080_30FF	0080_0000 – 0080_30FF

Default Algorithm Range	—	—	0000_0000 – 007F_FFFF	0000_0000 – 007F_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The status register bits can be set under Device > Configure. Erase must be selected if device to be programmed already has QE bit enabled. There are four 256-Byte Security Registers with OTP locks independent from main memory mapped to [800000-8000FF][801000-8010FF][802000-8020FF][803000-8030FF] in the Data Pattern respectively. Please note that Security Register 0 (mapped to [800000-8000FF]) is reserved by Winbond for future use. It is recommended to use Security registers 1-3 before using register0.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	8401152
Manufacturer	Winbond
Packages	SOIC(8)
Part Number	W25Q64JVSSIM
Set programming	Yes
Vcc(program)	3.3
Package