Ubicom IP2022/BG80 BGA(80) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM80BGU | FASM80BGU |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM80BGU, FASM80BGU, WASM80BGU (repl.) | FSM80BGU, FASM80BGU, WASM80BGU (repl.) | WASM80BGU |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM80BGU, FASM80BGU, WASM80BGU (repl.) | FSM80BGU, FASM80BGU, WASM80BGU (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Internet Processor with 64KByte Program Memory.*** WARNING: Flash corruption may occur during power down if Brownout reset is disabled. ***In the buffer program memory is located at [10000h-1FFFFh].[20000h-2007Fh] is Configuration Block. All other locations are not usedand should be set to FFh.*** Programming bit 15 of FUSE1 (Device address 10001h; Buffer address 20002h) to ‘0’ will protect the device. ***Automatic lowest address to loads’ in Buffer Options must be disabled.’Byte Order’ must be set to ‘MSB=0 LSB=1′.’Check Electronic Identifiers’ must be enabled.Stand alone Read Compare Verify Sum operations must NOT be performed on a programmed deviceif the program code in the data file performs a self-programming on the device. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Ubicom |
|---|---|
| Packages | BGA(80) |
| Part Number | IP2022/BG80 |
| Set programming | Yes |
| Vcc(program) | 2.6 |
| Package |