Toshiba TC58NVG2S3EBAI5 FBGA(63) Device
Adapters for Automated Programmers
| 8th Gen | Flashstream |
| FVE4ASM63BGPA, FVE4ASM63BGPA | FVE4ASM63BGPA, FVE4ASM63BGPA |
Adapters for Manual Programmers
| 8th Gen | Flashstream |
| FVE4ASM63BGPA, FVE4ASM63BGPA | FVE4ASM63BGPA, FVE4ASM63BGPA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | NAND Flash Memory |
| Device Size: | 4Gbit |
| Algorithm Programming Method: | Parallel Programming |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Memory | R/W/E | Yes | 0000_0000 – 20FF_FFFF | 0000_0000 – 20FF_FFFF |
| Default Algorithm Range | R/W/E | — | 0000_0000 – 20FF_FFFF | 0000_0000 – 20FF_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Serialization Supported: | Yes |
| 2. | Total number of blocks: | 4096 |
| 2. | Minimun number of good blocks: | 4016 |
| 3. | Pages per block: | 64 |
| 4. | Page size: | 2 KBytes |
| 5. | Spare area size: | 64 Bytes |
| 6. | Bad block markers location : | byte 2048 of the first or second page of each block |
| 7. | Default bit error rate tolerance : | 1 bit ECC per 512 bytes of data |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 553648128 |
|---|---|
| Manufacturer | Toshiba |
| Packages | FBGA(63) |
| Part Number | TC58NVG2S3EBAI5 |
| Vcc(program) | 3.3 |
| Package |