+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Adesto Technologies AT25SF321-SSHD-B SOIC(8) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Flash Memory
Device Size: 32 Mbit
Algorithm Programming method: Standard SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 000000h-07FFFFh 000000h-07FFFFh
Default Algorithm Range R/W/E Yes 000000h-07FFFFh 000000h-07FFFFh

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device > Configure. Erase must be selected if device to be programmed already has QE bit enabled. There are three 256-Byte Security Registers with OTP locks independent from main memory mapped to [0400000-04000FF] [0400100-04001FF] [0400200-04002FF] in the Data Pattern respectively.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Adesto Technologies

Package
Packages

SOIC(8)

Bytes

0h-3F FFFFh; 40 0000h-40 00FFh; 40 0100h-40 01FFh; 40 0200h-40 02FFh

ByteWidth

AT25SF321-SSHD-B

VccProgram

8-bit Bytes

VppProgram

4195072

ElectricalErase

3.3