+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Winbond W25Q16JVSSSQ SOIC(8) Device

Adapters for Automated Programmers

9th Gen
FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.)

Adapters for Manual Programmers

9th Gen
FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.)

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: 16M-bit Serial Flash
Device Size: 16M-bit
Algorithm Programming method: Standard Single SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 001F_FFFF 0000_0000 – 001F_FFFF
256-Byte Security Registers R/W/E No 0020_1000 – 0020_30FF 0020_1000 – 0020_30FF
Default Algorithm Range 0000_0000 – 001F_FFFF 0000_0000 – 001F_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The status register bits can be set under Device > Configure. There are three 256-Byte Security Registers with OTP locks independent from main memory mapped to[201000-2010FF][202000-2020FF][203000-2030FF] in the Data Pattern respectively.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

2109696

Manufacturer

Winbond

Packages

SOIC(8)

Part Number

W25Q16JVSSSQ

Set programming

Yes

Vcc(program)

3.6