SanDisk SDINBDA6-16G (HS400) BGA(153) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMC153BGJ, FVE4ASML153BGL, FVE4ASMC153BGZ |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMC153BGJ, FVE4ASML153BGL, FVE4ASMC153BGZ |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | eMMC |
| Device Size: | See below |
| Algorithm Programming Mode: | HS400 |
Memory Organization Before Formatting:
| Memory Type |
Attributes(*)
|
DUT Physical Byte Address(hex) | BPWin Buffer Byte Address(hex) |
| Boot Area Partition 1 | R/W/E | 0000000000-00003FFFFF | 0000000000-00003FFFFF |
| Boot Area Partition 2 | R/W/E | 0000000000-00003FFFFF | 0000400000-00007FFFFF |
| User Data Area | R/W/E | 0000000000-03AB3FFFFF | 0000800000-03ABBFFFFF |
| Default Algorithm Range | — | 0000000000-03AB3FFFFF | 0000800000-03ABBFFFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked.Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.Special Device Considerations:
| 1. | Default Device Size: | 16 GByte |
| 2. | Device size after enhancing the full user area: | 4344 MByte |
| 3. | Total number of sectors: | 30777344 |
| 4. | Write Protect Group Size: | 8 MByte |
| 5. | High Capacity Write Protect Group Size: | 8 MByte |
| 6. | MAX_ENH_SIZE_MULT: | 21Fh |
| 7. | Serialization Supported: | No |
| 8. | RPMB partition is not currently supported by this algorithm. | |
| 9. | General Purpose Partitions 1-4 if any are mapped directly after the boot partitions. This is followed by the rest of the User Data Area. | |
| 10. | Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. | |
| 11. | Each physical sector on the device has 512 bytes however 32 bytes of CRC-16 data must be embedded in the Data Pattern after every sector. | |
| 12. | Please use Device->Image_Format to create a Data Pattern formatted with the CRC-16 bytes based on MMC specifications. | |
| 13. | This algorithm verifies data after programming if Program operation is selected. | |
| 14. | Enabling Erase operation will erase the full boot partitions and user data area. | |
| 15. | Enhancing the user data area reduces the effective size of the device. Any data after the end of the effective size will be skipped. | |
| 16. | Only data files formatted through BPWin with the .bpmhs400 extension is supported in this algorithm. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 17737187328 |
|---|---|
| Manufacturer | SanDisk |
| Packages | BGA(153) |
| Part Number | SDINBDA6-16G |
| Set programming | Yes |
| Vcc(program) | 3.3 |