Renesas R7FA2E2A72DNK LAP(25) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR24QFNC |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR24QFNC |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Renesas RA Family |
| Device Size: | 1 MB Code Flash + 2kB Data Flash |
| Algorithm Programming Method: | Device Boot Firmware w/ Two-wire UART |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Code Flash | R/W/E | Yes | 0000_0000 – 0000_FFFF | 0000_0000 – 0000_FFFF |
| Data Flash | R/W/E | Yes | 4010_0000 – 4010_07FF | 4010_0000 – 4010_07FF |
| Default Algorithm Range | — | — | 0000_0000 – 4010_07FF | 0000_0000 – 4010_07FF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Data Flash memory range requires a full image with no blank areas. | |
| 2. | ID code mismatch will make ID check fail. ALGErase will erase all the memory including ID code and then fail at ID check where you can able to reprogram the device with New ID | |
Serialization is not supported. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 1074792448 |
|---|---|
| Manufacturer | Renesas |
| Packages | LAP(25) |
| Part Number | R7FA2E2A72DNK |
| Set programming | Yes |
| Vcc(program) | 3.3 |