Renesas R7F7015814AFP-C(Custom01) QFP(100) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASM100PQFC, FVE4ASM100PQFC | FVE4ASM100PQFC |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASM100PQFC, FVE4ASM100PQFC | FVE4ASM100PQFC |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 32-bit G3KH CPU core |
| Device Size: | 2048kBytes Code Flash + 32KBytes Code Flash (Extended User Area) + 64KBytes Data Flash |
| Algorithm Programming Method: | 3-Wire Serial I/O Mode |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) | Code Flash Memory | R/W/E | Yes | 0000 0000 – 001F FFFF | 0000 0000 – 001F FFFF | Code Flash (Extended User Area) Memory | R/W/E | Yes | 0100 0000 – 0100 7FFF | 0100 0000 – 0100 7FFF |
| Data Flash Memory | R/W/E | Yes | FF20 0000 – FF20 FFFF | FF20 0000 – FF20 FFFF |
| Default Algorithm Range | — | — | 0000 0000 – FF20 FFFF | 0000 0000 – FF20 FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: Program and Verify fucntion will skips adrress locations from 13000h-1FFFFh. Erase function for a Blank secured device is not supported. Security for this device is verified after performing Secure operation. The Security Byte can be set under Device > Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set bit 5 to 0 to disable Erase set bit 6 to 0 to disable Program set bit 7 to 0 to disable Read. Bits 4 to 0 are reserved and should be set to 1s. Bits 5 6 and 7 cannot be erased and once bit 5 is programmed to 0 the whole chip is secured. Serialization is not supported.RPI Considerations:For Enabling ID code Please Enable Secure.Config Options cannot be read in RPI Feature.Once Device is Programmed with ICU/ID code it cannot be accessed again. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 4280352768 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(100) |
| Part Number | R7F7015814AFP-C |
| Vcc(program) | 3.3 |