Microchip Technology PIC16F1454T-E/ST TSSOP(14) Device

IMPORTANT:

Device Type:	Microcontroller
Device Size:	8 KWords
Algorithm Programming Method:	ICSP

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Flash Program Memory	[R/W/E]	[Yes]	[0000 – 1FFF]	[0000 – 1FFF]

Default Algorithm Range	—	—	[0000 – 1FFF]	[0000 – 1FFF]

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.

1.	Serialization Supported:	Yes
2.	[Secure/Lock Erasable]:	Yes
3.	[Special file format required]:	Yes
4.	Erasing the device will erase Program Memory along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. The ID locations are addressed in the Data Pattern at [10000h-10007h].
5.	It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming or from the above mentioned addresses in Data Pattern.