+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

ISSI IS25LP064A-JBLA1 SOIC(8) Device

Contact Inside Sales

IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.

Device Type: 64M-bit Serial Flash
Device Size: 64 Mbit
Algorithm Programming method: Standard Single SPI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF
256-Byte Security Registers R/W/E No 0080_0000 – 0080_30FF 0080_0000 – 0080_30FF
Default Algorithm Range 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The status register bits can be set under Device > Configure. 64M-Bit Serial SPI Flash Memory with four 256Byte information rows. Four information rows are mapped to addresses [800000h-8000FFh] [800100h-8001FFh] [800200h-8002FFh] and [800300h-8003FFh] in the data pattern.Each information row can be permanently locked by setting the corresponding Information Row Lock Bit under Device Config. To use include the information rows in the data pattern select Entire Device under Device Config.


SKU: ISSI_IS25LP064A-JBLA1 Category:

Note: Lead Time is working days (5 days per week)

Adapters for Automated Programmers

8th GenFlashstream
FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASMR08SHLA, FVE4ASMH08SA, FVE4ASM08SHA (obs.), FVE4ASM08SHLAFVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASMR08SHLA, FVE4ASMH08SA, FVE4ASM08SHA (obs.), FVE4ASM08SHLA

Adapters for Manual Programmers

8th GenFlashstream
FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASMR08SHLA, FVE4ASMH08SA, FVE4ASM08SHA (obs.), FVE4ASM08SHLAFVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHA (obs.), FVE4ASMR08SHLA, FVE4ASMH08SA, FVE4ASM08SHA (obs.), FVE4ASM08SHLA

Adapters for Engineering Programmers


Last Updated: 05/18/2023

Additional information

8-bit Bytes

8389632

Manufacturer

ISSI

Packages

SOIC(8)

Part Number

IS25LP064A-JBLA1

Set programming

Yes

Vcc(program)

3.3

Reviews

There are no reviews yet.

Be the first to review “ISSI IS25LP064A-JBLA1 SOIC(8) Device”
  • Engineering Programmer from BPM

    1710 Manual Programmer

    $11,995.00 Read more
  • 2900L Manual Programmer with Actuator

    2900L Manual Programmer with Actuator

    Original price was: $6,995.00.Current price is: $5,695.00. Read more