+1 (713) 263-3776 | Sales Toll-Free: (855) SELL BPM | Service: (888) 490-0241
0 Items

The 2900L

Universal Chip Programming with Precision Socket Actuator Lever

Precision High Volume Production Manual Programmer– the 2900L is a multisite manual production programmer ideal for volumes from 1K to 500K+ per year. BPM’s 2900L is excellent for smaller jobs with long programming times

$7,995.00

Only 1 left in stock (can be backordered)

Extendable

Increase utilization & lower overall costs

Ergonomic Design

Reduce operator fatigue & increase yield

9th Gen Site Technology

Future-proof investment with universal site technology

Lowest Programming Cost

Higher throughput at lower cost per device

Improved Production Throughput

Operators can consistently actuate sockets while placing and removing devices, minimizing fatigue from opening standard and high-tension sockets by hand. Precision socket actuation increases socket longevity. Opening the socket fully and evenly every time minimizes the potential for bent pins on programmable devices. The Universal Pressure Plate supports virtually all available production sockets and allows for quick package changes and adjustments.

Performance

For ultimate performance, we combined our powerful Vector Engine Co-Processor®, capable of achieving a peak operating rate of 12.8 Gb per second, with true universal device support for MCUs, managed NAND, flash memory and more.

What’s Inside

Our Vector Engine Co-Processor accelerates flash memory waveforms during the programming cycle. Faster speeds are achieved through synchronous operations that eliminate the dead times when the DUT waits on the programmer. The result is programming near the theoretical limits of the silicon design– the faster the device, the faster the device is programmed.


Improved Production Throughput

Operators can consistently actuate sockets while placing and removing devices, minimizing fatigue from opening standard and high-tension sockets by hand. Precision socket actuation increases socket longevity. Opening the socket fully and evenly every time minimizes the potential for bent pins on programmable devices. The Universal Pressure Plate supports virtually all available production sockets and allows for quick package changes and adjustments.

Performance

For ultimate performance, we combined our powerful Vector Engine Co-Processor®, capable of achieving a peak operating rate of 12.8 Gb per second, with true universal device support for MCUs, managed NAND, flash memory and more.

What’s Inside

Our Vector Engine Co-Processor accelerates flash memory waveforms during the programming cycle. Faster speeds are achieved through synchronous operations that eliminate the dead times when the DUT waits on the programmer. The result is programming near the theoretical limits of the silicon design– the faster the device, the faster the device is programmed.

BPM’s Vector Engine BitBlast turbocharges programming- up to 52% faster

SanDisk SDIN8DE4-64G (with DDR)

  • Without BitBlast- 2,699.0 Seconds
  • With BitBlast- 1279.8 Seconds

Versatility & Capacity

OneNAND, eMMC, iNAND, MLC, SLC, MCU, PLD―whatever your device type, the 2900L supports it. Plus, you can connect up to eleven programmers to one PC for concurrent programming of up to 44 devices!

High-Quality Socket Cards

FVE4ASML49BGK Socket

Socket cards provide the electro-mechanical interface between your device and the programmer. They’re precisely designed to deliver high-fidelity waveforms to the programmable device, ensuring very high first-pass yield. Each individual socket card can be fully utilized and easily replaced to maintain full programming capacity. Our socket card design, with a receptacle socket option, ultimately increases your manufacturing uptime, produces higher first-pass yield, and saves replacement costs by as much as 75 percent.

Complete Ecosystem

BPM Microsystems has ownership of all designs, manufacturing, and support for all programming sites, robotics, vision systems, and software, so we can provide unmatched support and responsiveness

  • Reduce your time to market by doing New Product Introduction/First Article through Automated Production with the same hardware, algorithms, and software
  • 2900 and 2900L for 9th Gen Manual Production and Fast First Articles, plus 2710 and 1710 7th Gen Manual Programmers; the New 3901, 3910, 4900 & 4910 for Automated Productiononly BPM can deliver

Why use the 2900L?

Extendable

Connect multiple 2900s to one computer to program up to 44 devices simultaneously!

Highest Quality

Mission-critical quality standards

Future- Proof

Years of rock-solid performance

Faster & Easier

BPWin and JobMaster™ delivers quick set-up and fast production
Programming Hardware

Quantity: 240-pins drivers total, universal ground transistors 48 fully universal drivers with vcc, vpp, digital and clock 96 high speed digital and clock pins
Vpp Slew Rate: 40V/ms to 6V/us
Vpp Range: 0V to 25V
Ipp Range: Up to 1.2A total
Vcc Slew Rate: 40V/ms to 4V/us
Vcc Range: 0V to 13V
Icc Range: 0-2A
Digital Range: 0V to 4.5V
Digital Rise Time: 4ns
Protection: Vpp, Vcc, and digital pin drivers are protected from ESD events. Vpp and Vcc drivers are also protected from overcurrent.
Clocks: 800kHz to 64MHz

Software

Required: BPWin
File Type: Binary, Intel, Motorola, RAM, straight, hex, hex-space, Tekhex, Extended Tekhex, ASCII, hex, OMF, LOF, MER, STAPL, and others
Device Processes: ID check, blank check, continuity, auto start, blank, checksum, compare, program, test, verify, erase, secure
File Loading: No download time because programmer is PC controlled
Devices Supported: NAND Flash, NOR Flash, Serial Flash EPROM, EEPROM, Managed NAND, MCU
Protection: Overcurrent shutdown, power failure shutdown, ESD protection, reverse insertion, banana jack for ESD wrist strap
Additional Features: Automatic file type identification, Jobmaster™, BERT™, Auto Range, Data Editor, Revision History, Device and Algorithm information, Searchable help menu, BBM, ESS, session logging, on-line help
Operating Systems: Windows 10, Windows 7, 32bit
Algorithms: Large library of existing algorithms. All algorithms are manufacturer approved or certified (if required). BPM Microsystems has an excellent record of being first to provide certified algorithms for new devices

Mechanical Specifications

Operational Temperature: 55° to 90° F (13° to 32° C)
Relative Humidity: 30-80%
Dimensions: Length 304.800mm x width 304.800mm; working height (excluding sockets) 73.025mm
Weight: 3.7kg
Power: Connect 2900 to computer and launch BPWin; Software turns the programmer “on”

Pin Drivers

Quantity: 240-pins drivers total, universal ground transistors 48 fully universal drivers with vcc, vpp, digital and clock 96 high speed digital and clock pins
Vpp Slew Rate: 40V/ms to 6V/us
Vpp Range: 0V to 25V
Ipp Range: Up to 1.2A total
Vcc Slew Rate: 40V/ms to 4V/us
Vcc Range: 0V to 13V
Icc Range: 0-2A
Digital Range: 0V to 4.5V
Digital Rise Time: 4ns
Protection: Vpp, Vcc, and digital pin drivers are protected from ESD events. Vpp and Vcc drivers are also protected from overcurrent.
Clocks: 800kHz to 64MHz

Warranty

Hardware: One Year Warranty
Software: One Year Support

Intrigued?

Learn How BPM Microsystem's Manual Programming Systems Deliver ROI

Share This