+1 (713) 688-4600
NEW

4910 Product Specifications

PICK & PLACE SYSTEM

Handler Throughput: Up to 1,708 Devices per Hour (with vision centering)
Component Handling Range: 0402 to 240-pin QFP
Machine Dimensions: Length 106.6cm, width 106.2cm, height 136.0cm
Machine Net Weight: 405.91kg
Shipping Dimensions: Length 122cm, width 122cm, height 175cm
Shipping Weight: 630 kg
Safety Standard: CE compliant
Self-test: Power supplies, CPU, memory, X, Y, Z, theta motion systems, nozzle run-out, and height

POSITIONING SYSTEM

X-Y Drive System: High-performance stepper motor driven belt
X-Y Encoder Type: Linear optical scale
X-Y Axis Resolution: +/-0.015mm
X-Y Axis Maximum Velocity: 150cm per second
Z Drive System: High-performance stepper motor-driven lead screw
Theta Drive System: Precision stepper motor-driven
Theta Axis Resolution: 0.014°
X-Y Axis Accuracy: 14µ
Z-Axis, WhisperTeach™ Placement Accuracy: +/-0.015mm

VISION SYSTEM

Alignment: CyberOptics™ On-The-Fly
Downward Vision: CCD, GigE compliant

SYSTEM REQUIREMENTS

Air Pressure: 80 psi (5.56 bars) minimum
Air Flow: 2.0 scfm (50.1L/min)
Operational Temperature: 55° to 90° F (13° to 32° C)
Relative Humidity: 30-80%
Minimum Floor Space: 183cm x 107cm
Input Line Voltage: 200-250VAC
Input Line Frequency: 50/60 Hz
Power Consumption: 2.5KVA

SOCKET OPTIONS

Socket Card: Including, but not limited to, CSP, QFN, μBGA, BGA, MLF, SOIC, LAP, TSOP, LCC, PLCC, QFP
Other Options: Receptacle Socket options

PROGRAMMING HARDWARE

Architecture: 9TH Gen Concurrent Programming System with Vector Engine Co-Processor
Programming Sites: 2 to 4 sites, 1 to 4 sockets per site, 16 sockets max
Calibration: Annual, may be performed on site
Diagnostics: RAM, communications, calibration, timing, LEDs, fans, pinoe, power supplies, voltage/current/slew for vpp and vcc, high current vcc mode, digital pin drivers, and relays. Ground Transistors, digital driver path to programmer, dcard LEDs, customizable diagnostics per dcard, Precision Measurement Unit (PMU) pin drivers
Memory: 256GB per site, upgradable to 512GB
Communications: USB 2.0
Data Pattern Broadcast: 25MB per second
Firmware Updates: Software automatically performs firmware download

PIN DRIVERS

Quantity: 240-pins standard, per site
Vpp Range: 
 0V to 25V 
Ipp Range: 
Up to 1.2A total
Vcc Range: 
 0V to 13V
Icc Range: 
 0-2A
Rise Time: 
 350 ps
Protection: 
 ESD, overcurrent shutdown, power failure shutdown 
Independence: 
pin drivers and waveform generators are fully independent and concurrent on each site 
Digital Range: 
0-4.5V
Clocks:
 800kHz to 200MHz

SOFTWARE

Required: BPWin™
File Type: Binary, Intel, Motorola, RAM, straight hex, hex-space, Tekhex, Extended Tekhex, ASCII, hex, OMF, LOF, MER, and others
Device Processes: ID check, blank check, continuity, auto start, compare, read, erase, program, verify, multi-pass verify, test, checksum, secure, device configure, auto-range, options and more
Operating System: Windows 7, 64-bit
Network Interface: Gigabit Ethernet
Advanced Feature Software: Simple and complex serialization, CJob Monitor and CJob Control (API)

PERIPHERAL OPTIONS

Peripherals: Tape Input/Output, Tray Stacker, Tray Shuttle, Tube Input/Output, CO2 Laser Marker

 

WARRANTY
Hardware:  One Year Warranty
Software:
 One Year Support

Intrigued?

Learn How BPM Microsystem Delivers Maximum ROI

Share This