3900 Specifications

PICK & PLACE SYSTEM

Handler Handler Throughput: Up to 1,100 Devices per Hour
Component Handling Range: 0402 to 240-pin QFP
Placement Force: 60-600 grams position control

MACHINE SPECIFICATIONS

Machine Dimensions: Length 127cm, width 61cm, height 137cm
Machine Net Weight:
195.45 kg
Shipping Dimensions:
Length 162cm, width 96cm, height 177cm
Shipping Weight:
309.09 kg Safety Standard: CE compliant
Self-test: 
Power supplies, CPU, memory, X, Y, Z, theta motion systems, nozzle run-out, and height

POSITIONING SYSTEM

X-Y Drive System: High-performance stepper motor driven belt
X-Y Encoder Type: Linear optical scale
X-Y Axis Resolution: 0.0050mm
X-Y Axis Maximum Velocity: 76cm per second
Z Drive System: High-performance stepper motor driven lead screw
Theta Drive System: Precision stepper motor-driven direct drive assembly
Theta Axis Resolution: 0.014°

VISION SYSTEM

Type: Dual CCD, Upward and Downward dual light rings, configurable, bright and dark field lighting
Image Capture Rate: 30 microseconds
Communication: GigE compliant

SYSTEM REQUIREMENTS

Air Pressure: 80 psi (5.56 bars) minimum
Air Flow: 2.0 scfm (50.1L/min)
Operational Temperature: 55° to 90° F (13° to 32° C)
Relative Humidity: 30-80%
Minimum Floor Space: 183cm x 107cm
Input Line Voltage: 100-130/200-260VAC
Input Line Frequency: 50/60 Hz
Power Consumption: 1KVA

SOCKET OPTIONS

Socket Card: Including, but not limited to, CSP, QFN, μBGA, BGA, MLF, SOIC, LAP, TSOP, LCC, PLCC, QFP
Other Options: Receptacle Socket options

PROGRAMMING HARDWARE

Architecture: 9TH Gen Concurrent Programming System with Vector Engine Co-Processor
Programming Sites: 2 to 4 sites, 1 to 4 sockets per site, 16 sockets max
Calibration: Annual, may be performed on site
Diagnostics: RAM, communications, calibration, timing, LEDs, fans, pinoe, power supplies, voltage/current/slew for vpp and vcc, high current vcc mode, digital pin drivers, and relays. Ground Transistors, digital driver path to programmer, dcard LEDs, customizable diagnostics per dcard, Precision Measurement Unit (PMU) pin drivers
Memory: 256GB per site, upgradable to 512GB
Communications: USB 2.0
Data Pattern Broadcast: 25MB per second
Firmware Updates: Software automatically performs firmware download

PIN DRIVERS

Quantity: 240-pins standard, per site
Vpp Range: 
 0V to 25V 
Ipp Range: 
Up to 1.2A total
Vcc Range: 
 0V to 13V
Icc Range: 
 0-2A
Rise Time: 
 350 ps
Protection: 
 ESD, overcurrent shutdown, power failure shutdown 
Independence: 
Pin drivers and waveform generators are fully independent and concurrent on each site 
Digital Range: 
0-4.5V
Clocks:
 800kHz to 64MHz

SOFTWARE

Required: BPWin™
File Type: Binary, Intel, Motorola, RAM, straight hex, hex-space, Tekhex, Extended Tekhex, ASCII, hex, OMF, LOF, MER, and others
Device Processes: ID check, blank check, continuity, auto start, compare, read, erase, program, verify, multi-pass verify, test, checksum, secure, device configure, auto-range, options and more
Operating System: Windows 7, 32- and 64-bit
Network Interface: Gigabit Ethernet
Advanced Feature Software: Simple and complex serialization, CJob Monitor and CJob Control (API)

PERIPHERAL OPTIONS

Peripherals: Tape Input/Output, Tray Stacker, Tray Shuttle, Tube Input/Output, CO2 Laser Marker

 

WARRANTY

Hardware:  One Year Warranty
Software:
 One Year Support

Intrigued?

Learn How BPM Microsystem Delivers Maximum ROI

Share This